# Optical output of RW800

**URL:** <https://community.roseaudio.kr/t/optical-output-of-rw800/16206>\
**Category:** Uncategorized\
**Created:** [October 30, 2026, 1:10am UTC](https://community.roseaudio.kr/t/optical-output-of-rw800/16206 "2026-10-30T01:10:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![2olegendforeverwest](https://community.roseaudio.kr/letter_avatar_proxy/v4/letter/2/b5ac83/32.png) [@2olegendforeverwest](https://community.roseaudio.kr/u/2olegendforeverwest)\
**Post date:** [October 30, 2026, 1:10am UTC](https://community.roseaudio.kr/t/optical-output-of-rw800/16206/1 "2026-10-30T01:10:44Z")

</div>

Hi, my friend bought RW800 recently and he used optical output to connect his Playback Design MPS8 as DAC. However, his MPS8 do not receive any data from RW800. How to solve his problem? The RCA output is ok.

---

<div class="post-metadata">

**Author:** ![burki](https://community.roseaudio.kr/letter_avatar_proxy/v4/letter/b/57b2e6/32.png) [@burki](https://community.roseaudio.kr/u/burki)\
**Post date:** [October 30, 2026, 5:43am UTC](https://community.roseaudio.kr/t/optical-output-of-rw800/16206/2 "2026-10-30T05:43:14Z")

</div>

You’ve to use the Rose Air app for changing the in- or output:

 ![Screenshot_20261030_064118](https://community.roseaudio.kr/uploads/default/original/2X/d/d90817d81a34bf4e4d0ee3eb5466fe84d531fd10.jpeg)  
and then you can change it under audio:  
 ![Screenshot_20261030_064232](https://community.roseaudio.kr/uploads/default/original/2X/7/78403966447f5c63662ad5b40f7a22e63b0e08a7.jpeg)

---

<div class="post-metadata">

**Author:** ![2olegendforeverwest](https://community.roseaudio.kr/letter_avatar_proxy/v4/letter/2/b5ac83/32.png) [@2olegendforeverwest](https://community.roseaudio.kr/u/2olegendforeverwest)\
**Post date:** [October 30, 2026, 2:15pm UTC](https://community.roseaudio.kr/t/optical-output-of-rw800/16206/3 "2026-10-30T14:15:14Z")

</div>

My friend chose already but MPS8 did not receive/get the data and seems not connected

---

<div class="post-metadata">

**Author:** ![ROSELOA](https://community.roseaudio.kr/user_avatar/community.roseaudio.kr/roseloa/32/282_2.png) [@ROSELOA](https://community.roseaudio.kr/u/ROSELOA)\
**Post date:** [November 4, 2026, 1:46am UTC](https://community.roseaudio.kr/t/optical-output-of-rw800/16206/4 "2026-11-04T01:46:24Z")

</div>

Hello,

As mentioned by burki, other than switching the output setting, there isn’t much else to configure. The RW800 is a very straightforward device with minimal controls.

Optical cables are relatively fragile and prone to damage. Could you please check if the optical cable itself might be defective or damaged?

Additionally, it is quite easy to mix up the Optical IN and OUT ports, so please double-check that the cable is connected to the correct output/input terminals on both devices.

Thank you.
