On RoseConnect, we have the ability to turn the RS130’s screen on and off.
Can you assign a button of the RS130’s remote control to turn the RS130’s screen on and off?
Hello Dominique
By holding down the stop button of the remote control the menu: restart, turn off the device, turn off the screen appears
Hello Gilles,
Thank you very much for the trick…
Ok, I need to see if I can configure a long press with my Logitech Harmony remote that is not interpreted as the short press that puts the RS10 to sleep.
@ ROSEHAN
Gilles told me that a long press of the Power button on the RS130 remote does indeed bring up a menu with three options, including turning off the screen.
Such a long press is difficult to configure on my Logitech Harmony Elite remote.
Would it be possible to configure another button on the remote to turn off the screen?
Technically, does a long press have the same IR hexadecimal encoding as a short press?
Why doesn’t the IR sensor first detect the short press, which puts the RS130 into sleep mode?
Currently, our remote control only supports Bluetooth remote control, so when your RS130 is turned off, Bluetooth cannot be turned on. Our best option is to send it to standby mode when RS130 is ON.
The remote control does not support the LCD OFF function.
You can turn RS130 into standby mode on/off using the remote control.
If your RS130 is in the LCD OFF state, you can turn it ON by pressing the power button on the remote control.
Why do you say that??? : “Currently, our remote control only supports Bluetooth remote control”
I only use my RS130 with IR control ; via IR commands learned by a Logitech Harmony Elite remote control.
Can you please review my questions and forward them to technical support?
You may have connected the IR cable to the rear of the RS130.
However, since the USB port is also unusable when the RS130 is powered off, you cannot turn the RS130 on with the remote control, just like with Bluetooth.
But no, I haven’t connected anything to the RS130. The RS130 responds very well wirelessly to its remote control in both Infrared and Bluetooth modes.
So, thank you for forwarding my questions to Rose’s Technical Support.
Hello,
You mean you don’t want to turn off the power, but rather turn off only the LCD while music is playing, correct?
As you know, there is no dedicated button on the remote control to directly perform LCD OFF.
The remote does have a Favorites button, and users can freely set which favorites are added to this menu (Rose streamer > Settings > System Settings > Remote Control Favorite Settings).
Unfortunately, LCD OFF is not included in the selection list. I will suggest this to the software team and check if it can be made possible.
Best Regards,
Thank you, ROSELOA.
You’ve understood my request.
It would be a very good solution to put the “screen off during playback” option back in the list of options for the Favorites button on the RS130’s remote control.
Let’s hope the technical team will reintroduce this option.