Maximum sample rate for the RS 130

#1

When I set up the RS130 for my roon streaming, the maximum sample rate is 192k. What’s the problem?

#2

What is the maximum sample rate of the DAC you have connected to it?

#3

@adcrespo

If the maximum sample rate shows as 192kHz in Roon, it is usually related to the connection type or DAC settings, not a fault with the RS130.

Please check the following:

  1. If you are using coaxial or optical (S/PDIF), the maximum sample rate is typically limited to 192kHz.
  2. Check whether your DAC supports higher sample rates through the current input.
  3. In Roon Settings > Audio > Device Setup, make sure no sample rate limit or DSP is applied.
  4. If possible, try using USB Audio Out to allow higher sample rates.
#4

I discovered the problem: although I was using the I2S output, the optical outputs weren’t automatically turned off. Only after turning off each of the 3 outputs, I got the higher sample rates.