My RS130 i2S doesn't work at all

Function IN/OUT Settings
#1

Whether hooked up to my Denafrips or not. The music on the screen does not start. Just the spinning wheel goes forever. When I try Roon, it just burns through a bunch of song titles in a row before giving up worth “too many attempts.” Again, the behavior is the same whether the cable is plugged into the dac or not.

#2

@EGR64

Please check a few things.

  1. Does your RS130 play music normally with other connections besides i2S?
  2. Is your RS130 connected to Wi-Fi or Ethernet normally?
  3. Please take a picture of the System info screen on your RS130 and show it to me.
    RS130–>Settings–>System info
#3

Usb works.
Ethernet fiber optic
I’m away until Friday. I’ll send pics then.

#4

17349632209755731031290807344498
173496322097557310312908073444984000×1848 820 KB

#5

@EGR64

Please take a video playback screen and send it to the email below.
eunseong96@citech.kr

#6

I don’t understand. Please reiterate.

#7

@EGR64

Please check a few things.

  1. Are all the audio sources on your RS130 not playing?
  2. Do you still experience the same symptoms after factory resetting your RS130?
    RS130–>Settings–>System settings–>Factory reset
#8

USB out works. I’ll try the reset tomorrow.

#9

No luck. Does it need to be nearby?

#10

@EGR64

  1. Would you try to connect your ROSE streamer’s network to your phone’s hotspot tethering?
    How to set up a Personal Hotspot on your iPhone or iPad - Apple Support *
    Check if you can play radio, rosetube with your hotspot tethering.
  2. If you can connect your streamer network to phone’s hotspot tethering, maybe resetting the router in your place may help.
#11

My issue is with i2S

#12

@EGR64

Are you saying that when you connect RS130 to Denafrips DAC via i2S, sound sources that require network such as Rosetube will not be played?

#13

Correct. Network streaming works fine otherwise through any other output. And other streamers connect to the dac just fine with i2S. But the RS130 won’t pass the signal. It looks for a dac (should it really have to?) but doesn’t find one.

#14

@EGR64

  1. Does the same symptom occur even if you change the A/B Type when using an i2S connection?
  2. Please tell me the DAC model name you are using.
  3. Does an error message appear when playing a Rosetube video when connecting the RS130 and the DAC with i2S? If an error message appears, please tell me the message content.
  4. Does the same thing occur even if you completely reboot your RS130?
    image