My Rose Connect app (on my PC) notified me that an update was available. I downloaded and installed it, now the app can’t find my 150b, even though it was connected when it prompted me to download and install the update.
How do I get the Rose Connect app on my pc to find my 150b?
The app on my phone has no trouble finding my 150b on the same network.
While I realize that I can manually input the IP address of the 150b into the Rose Connect app, but shouldn’t the app be able to find the 150b without my intervention?
It is a pain in the ass to input this number each time I want to use the app.
This seems like a defect that should be acknowledged and fixed.
We apologize for any inconvenience caused.
Currently, there is a symptom that the connection with the Rose device does not work well in the PC RoseConnect.
We fixed the questionable part.
Please download RoseConnect from the link below and check if the same symptoms appear.
mac_ver_4.6.09
================================================== =======
win ver 4.6.09
I have just put another thread due to exactly the same issue , going back to provious version of PC doesnt fix so must be new firmware update
I just installed the PC version and it still cannot locate my 150b. The “fix” did nothing that I can detect.
Please try again.
I also have installed ver 4.6.09 and I still had the same issue . My Rose 150b IP is 192.168.1.241 my pc IP is 192.168.1.207 both have subnet mask of 255.255.255.0 so no routing issues.
I have however found my issue. It was becuase I have recently installed a new pci ethernet card with 2 1000 gbit ports . When I disablled both new ports in Control Panel > Network Settings, so only the adapter with the Rose connected was available to Windows, and then restarted Rose Connect - it found the device straight away :0) - so looks like Rose Connect software doesnt like multiple adapters connected to the OS and gets confused …