RoseConnect Premium V5.09 does not work properly on Apple iOS

Support
#21

My DMP-A10 uses the exact same implementation as the RS150B, and I’ve never encountered any such problems in the three months of use. Furthermore, I tried running them simultaneously under the same network conditions, and unfortunately, the Rose completely failed between 3 and 5 Mbps. And the EverSolo worked without any keying issues.

EverSolo has handled data buffering perfectly. The hard truth is, I paid $6,200 for the RS150B, and $4,400 for the DMP-A10.
I got it cheaper and many times more from EverSolo. :heart_eyes:

#22

Well, one has to be blind not to see that DMP series are better devices in most respects (except for the screen). But something is off there – even a 250 has no problem playing highest supported resolution over a network. I would look at either the network port, or whatever switch port it is plugged into…

1 Like
#23

Thank you for the advice. I’ll definitely think about it. :wink:

#24

:slight_smile:

Well, the only time I had stuttering and skipping on the Rose (well, anything on that equipment rack, but it was most noticeable with Roon which does not buffer much) it turned out that the switch there was going intermittently bad. Removed all the Netgear crap from the network, and everything works well.