Pilotage de mon RS250

#1

Bonjour ,
Pouvez-vous svp me réexpliquer la façon de piloter mon RS 250 via mon IPD ( je n’arrive plus à me servir de mon IPad comme télécommande)
En vous remerciant par avance .
Jacques Dubuc

#2

@Milles

To control your RS250 with your iPad, please make sure that the RoseConnect app is installed and updated to the latest version from the App Store. Your iPad and the RS250 must be connected to the same local network (Wi-Fi).

  1. Launch the RoseConnect app on your iPad.
  2. The app should automatically detect your RS250 on the network.
  3. Select the RS250 from the device list, and you will be able to use your iPad as a remote control.

If the RS250 does not appear in the app, please check the following:

  • Confirm that both the RS250 and your iPad are on the same Wi-Fi network.
  • Restart the RS250 and your router, then try again.
  • Reinstall the RoseConnect app if the issue persists.

Should the problem continue, please let us know your iPad model, iOS version, and the RoseConnect app version, so that we can assist you further.

#3

En vous remerciant, vous êtes toujours efficace dans vos réponse …et c’est très confortable.
Pour info mon problème est résolu .
Dernière question quelle est la toute dernière version logiciel du RS 250 ?
Cordialement
Miles

#4

@Milles

The latest software version of the RS250 is 5.9 (Official).

#5

Bonjour ,
Après vérification mon RS250 affiche la version 5.8 ?
Comment installer la version 5.9 ?
En vous remerciant.
Miles

#6

@Milles

Your RS250 is currently showing version 5.8 (Early Access). If you would like to upgrade to version 5.9 (Official), please follow the steps below:
RS250 → Settings → System Info → Use the Official update Version → RollBack