So, no one else has issues with the new “eARC Always Connected” feature set to ON?
Can anybody tell me what this feature is all about? Since everything works fine with my RS520 when it is set to OFF, I would like to know its purpose.
For me, HDMI ARC/eARC is very important, since I always watch TV with the sound being played over my RS520.
The “eARC Always Connected” feature keeps the HDMI eARC connection active even when the RS520 is in standby mode.
This can help ensure faster and more stable audio connections with your TV.
If everything works well with the setting OFF, you can keep it that way.
But if you experience any ARC/eARC issues, turning it ON may help.
Hello Rosehan!
I have an RS250A. Is this update worth it, or is it geared toward new products?
My current version is 5.7.07.
I look forward to your feedback, thank you!
I have the same problem with the same combination.
If I have the RS520 in standby, eARC is not working. I have to shut off the unit and restart the Amp. Why ist that. Before the release, everything was perfect …
In my case it’s exactly the opposite. SONY TV. Finally I can set the equipment so that if ROSE is off the sound comes from the TV speakers and when it’s on - it switches to the HiFi speakers. It works as it should, in previous versions regardless of the settings, the amplifier always turned on, which was not good for me.
Witam.Czy ktoś ma problemy z uruchamiianiem się Rose 150B po aktualizacji 5.9.Moje urządzenie czasami nie chce sie uruchomić tylko pojawia się logo Rose na wyświetlaczu i znika,słyszę też stukanie przekaźników/urządzeń w obudowie Rose.Po wyłączeniu z zasilania i ponownym włączeniu,urządzenie się uruchamia ale o wiele dłużej niż przed aktualizacją,dłużej nawet chyba niż na początku.
Hello. Does anyone have problems with starting the Rose 150B after the 5.9 update? My device sometimes does not want to start, only the Rose logo appears on the display and disappears, I can also hear the clicking of relays/devices in the Rose housing. After turning it off and on again, the device starts up but much longer than before the update, probably longer than at the beginning.
Go to the Input Selection, e.g. by Clicking on „eARC - INTERNAL“ of the Status Bar on the main screen. Then, click on the tooth wheel of the INPUT field („eARC IN“ should be selected by a hook) and switch off „Always Connected“. Finally confirm by clicking on the upper right hand side. After this, your Samsung TV should work again as expected.
Dear all,
since 2 days I am a proud owner of the new RS151, a really wonderful product. I updated from an Eversolo DMP- A8, wich is also a very good streamer/DAC, especially for the price.
Now my question and problem:
It is impossible, to update the firmware to 5.9. My system is stuck to 5.7. and shows no update since nearly 48h online or in standby.
What can I do? Does anyone have an idea?
Network is stable via cable, no wifi established. Qobuz runs smoothly via the Rose app.
Thanks a lot for your help!
Bernd
Hi,
You can perhaps switch to EA (Early Access), update to EA version and then come back to standard.
It seems that version 5.9 creates more problems than solutions. I’ll wait for another version to be released with the appropriate fixes.
Hello @alain204 ,
First, please go to RS520 > Input/Output Settings > Settings and set Always Connected to OFF, then check the how it works.
We are currently reviewing the additional issues you mentioned.
Hi noBru77,
thanks for your reply.
I already changed to 5.8 EA, switch back to “official version” is also not possible,nsystem says “You are already using the latest version” …
Really strange
Thank you MuP,
I tried your procedure for at least 10 times, no “Roll back” to the latest official version possible.
It seems my RS 151 does not connect to the update server correctly.
Of course, the URL- setting is not changed from factory setting
Sorry, a new official release was just released for the RS151 (what about the other device types??). Maybe it’ll work now…
Finally this new version works, my streamer likes the updated firmware a lot!
Thanks for your help
Yes they do. And we are all able to download the early releases and even participate, The fact that users have so many different devices and operating systems and communication protocols makes it virtually impossible to identify and test every single scenario.
Those who don’t have an RS151 are screwed and hope they deign to release a decent version for the rest of the products…
There is no set update schedule for devices other than the RS151.
However, there are some areas that need to be fixed, so we will distribute the update as soon as possible.